LFN170 Mixing Valve, 1 in, FNPT, Brass, Rough Brass
PartWTTLFN1701
MFG0559125
Description
WATTS®, 0559125, Master Tempering Valve, Series: LFN170, 1 in Nominal, NPT End Style, 125 psi Pressure, 5 to 200 deg F, 4 gpm Flow Rate, Media: Water, Brass Body, Domestic
Price/Availability Accessible On Login
- Paraffin-based thermostat to sense and adjust outlet temperature
- Dirt and lime resistant poppet and seat design
- 68 gpm capacity at 45 psi
- Vandal-resistant locking mechanism to secure temperature setting
- LFN170-M3 uses paraffin-based thermostat to sense and adjust outlet temperature
- Virtual shutoff if supply pressure fails
- Factory tested
- 200 deg F max hot water temperature
- Minimum hot water supply temperature: 5 deg F above set point, with equal pressure
- Temperature adjustment range: 90 to 180 deg F, Low limit cannot be less than the cold water temperature, for best operation, Hot water should be at least 5 deg F above desired set point
- Hot water inlet temperature range: 120 to 180 deg F
- Cold water inlet temperature range: 40 to 80 deg F
- The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight
- 10.13 Cv flow capacity
This 1 in lead free master tempering valve is designed for use in commercial and institutional applications, to mix hot and cold water to reduce high service water temperature to the building distribution piping system. It is designed for installation at the hot water source. It features a lead free brass body construction, a copper paraffin thermostat assembly and a lockable temperature adjustment for increased safety. Polysulfone internals resist excessive heat, liming and corrosion and a single-seat design ensures tight shut off in the event of cold water supply loss. Listed to ASSE 1017 and IAPMO cUPC in compliance with CSA B125.3. The temperature range is 90 to 180 deg F and the maximum pressure is 125 psi.
| Nominal Size | 1 in |
| End Style | FNPT |
| Material | Brass |
| Finish | Rough Brass |
| Series | LFN170 |
| Body Material | Brass |
| Domestic/Import | Domestic |
| Flow Rate | 4 gpm |
| Media | Water |
| Pressure Rating | 125 psi |
| Temperature Rating | 5 to 200 deg F |
| Brand | WATTS® |
| Package Width | 4.75 in |
| Package Height | 2.75 in |
| UNSPSC | 40141600 |
| Alternate Part Number 1 | LFN170M3 |
| Package Length | 10.812 in |
| Country of Origin | US |
| Manufacturer | Watts Water Technologies |
| UPC | 686408611989 |
| Manufacturer Part Number | 0559125 |
Limited
ASSE 1017|CSA B125.3|IAPMO/cUPC Listed|PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Commercial and Hot Water Distribution
Price/Availability Accessible On Login
- Recommended Accessories
- Competitive Brands
- Recently Viewed
No applicable products
No applicable products
No applicable products
WATTS®LFN170 Mixing Valve, 1 in, FNPT, Brass, Rough Brass
- Customers Also Purchased
No applicable products